NEW 19 INCH VEEMANN VC359 M359 Y SPOKE ALLOY WHEELS IN SATIN BLACK, DEEPER CONCAVE 10" REAR ET35/38 5x120

Name: NEW 19 INCH VEEMANN VC359 M359 Y SPOKE ALLOY WHEELS IN SATIN BLACK, DEEPER CONCAVE 10" REAR ET35/38 5x120
Brand: Veemann Alloy Wheels
SKU: 19VC359SB35/38-120
Price: 950.00 GBP
Availability: InStock

Ad ID: 19VC359SB35/38-120

£1,099.00 £950.00

Qty:

Available to order now Or call 01323 647222

CLICK HERE to CONTACT US ABOUT THIS PRODUCT

In stock

Please select the above options to enable 'Add to Basket'

Available to order now Or call 01323 647222

CLICK HERE to CONTACT US ABOUT THIS PRODUCT

Manufacturer
Veemann Alloy Wheels

Ad ID
19VC359SB35/38-120

Diameter
19"

Colour
SILVER

PCD
5x120

Width
9" FRONT / 10" REAR

Offset
ET35 FRONT / ET38 REAR

Center Bore
72.6

Load Rating
690kg

Description:

New set of four 19" Veemann VC359 M359 Y spoke alloy wheels, finished in Satin Black with deeper concave rears

These wheels were formerly under the Avant Garde brand but Veemann now have them under their Veemann Collaboration (VC) brand. A series of shared designs licensed for distribution by Veemann in Europe and selected wheel brands in the United States.

These high quality wheels now featuring a Flow Formed / Forged Construction for increased strengh and lighter weight at only 10kg per wheel.

They are 19" x 9" et35 front and 19" x 10" et38 rear with a 72.6cb. These will fit the F3X 3/4 series cars but run very flush to the arch.

Please note these are not the correct fitment for the E9X m3 cars, they use the lower offset ones which can be found clicking here

We can supply competitively priced tyre packages which will come fitted and balanced so the wheels are ready to mount onto your vehicle, please click the 'contact us about this product' to enquire.

Please note: We strongly advise against using run flat tyres with any alloy wheel. Run flat tyres have a very hard side wall and this combined with the condition of the UK roads will increase the likelihood of alloys cracking.

Our standard structural warranty on wheels is 12 months. We can only provide 3 month warranty on Polished or Diamond Cut wheel finishes. Warranty is void in cases where wheels have suffered damage from stone-chips, kerbing, neglect or other 3rd party causes. We strongly advise wheels that have Polished or Diamond Cut finishes are not used during the wet/winter months. We advise they are only used as fair weather wheels and show use. All our used wheels carry no warranty or guarantee.

CLICK HERE for SHIPPING CHARGES We ship almost anywhere in the world, find out now what it will cost, see our detailed shipping charges.

We also offer TYRE PACKAGES Click here to find out more about the tyre packages that we are able to supply.

Information Regarding Polished/Lacquered Wheels Finishes

We can only provide 3 month warranty on Polished or Diamond Cut wheel finishes. Warranty is void in cases where wheels have suffered damage from stone-chips, kerbing, neglect or other 3rd party causes. We strongly advise wheels that have Polished or Diamond Cut finishes are not used during the wet/winter months. We advise they are only used as fair weather wheels and show use.

A Polished/Lacquered wheel finish is naturally vulnerable and the longevity of the finish is affected by stone-chips, salt/grit during winter months and kerbing etc. If the lacquer is in anyway broken we would advise purchasing a clear lacquer to paint over the affected area, keeping it sealed. There are also good wheel waxes on the market that can be used on the polished areas to act as a barrier helping to extend the life of the finish. We would also advise to only use a gentle soap solution for cleaning and avoid all acid- based solutions.